logix - network management

part code	illustration	description
ADAP_WAC		Wan Analyzer Card - pcmcia (PCCard) Wan Adapter
INF_V35		V.35 "Y" interface cable 34 Pin Winchester Male-Female to 25 Pin D Female, supplied with INF_PCM_V24 (shown) to connect to ADAP_WAC (shown but not included with INF_V35)
INF_E1		E1 / G703 / ISDN Primary Rate interface to 15 Pin D Monitor port - supplied with cables CAB_E1_MON, CAB_E1_CNF and CAB_E1_RJ (shown below)
INF_T1		T1 interface to 15 Pin D Monitor port supplied with cables CAB_E1_MON, CAB_E1_CNF and CAB_E1_RJ (shown below)
CAB_E1_MON		15 pin E1/G703/PRI/T1 Monitor port cable to ADAP_WAC supplies Monitored Wan data from digital link to WAC
CAB_E1_CNF		9 pin Male to 9 pin Female 2 mtr Console configuration cable enables E1/T1 channel configuration for WanPeek
CAB_E1_RJ		RJ to RJ E1/G703/PRI/T1cable used to intercept E1/T1 Network CPE
INF_PCM_X21		X.21 (V.11, RS.422) interface pod 15 pin D to ADAP_WAC supplied with RIB_X21 "Y" cable (shown) - used to intercept physical X.21 data link
INF_PCM_V24		V.24 (RS.232-C) pcmcia stub cable, 25 pin D to ADAP_WAC supplied with RIB_V24 "Y" cable (shown)- used to intercept physical V.24 data link NOTE: INF_PCM_V24 is also used with INF_V35 to connect to ADAP_WAC NOTE: INF_PCM_V24 is also used with INF_RS449 to connect to ADAP_WAC
INF_449		RS.449 interface "Y" cable, 37 Pin D Male-Female to 25 Pin D Female requires INF_PCM_V24 to connect to ADAP_WAC
INF_BRI		ISDN Basic Rate interface Pod, connects via S Bus to ISDN line, with D, B1and B2 monitor ports, supplied with CAB_BRI_MON monitor cable.
CAB_BRI_MON		BRI interface cable, RJ12 Monitor port to ADAP_WAC
INF_530		RS.530 interface cable, 25 Pin D

RIB_X21		X.21 flat ribbon 'Y' intercept cable 15 pin D, 2 mtr Male-Female to Female used to intercept X.21 physical data link
RIB_V24		V.24 flat ribbon 'Y' intercept cable 25 pin D, 2 mtr Male-Female to Female used to intercept V.24 physical data link